{"id":125,"date":"2018-12-13T10:12:43","date_gmt":"2018-12-13T10:12:43","guid":{"rendered":"http:\/\/www.stepperchina.com\/?p=125"},"modified":"2018-12-13T10:12:43","modified_gmt":"2018-12-13T10:12:43","slug":"whats-the-difference-between-detent-torque-and-holding-torque","status":"publish","type":"post","link":"https:\/\/www.stepperchina.com\/index.php\/2018\/12\/13\/whats-the-difference-between-detent-torque-and-holding-torque\/","title":{"rendered":"What\u2019s the difference between detent torque and holding torque?"},"content":{"rendered":"\n

One feature of stepper motors that differentiates them from other motor types\u2014particularly servo motors\u2014is that they exhibit holding torque. This means that when the windings are energized but the rotor is stationary, the motor can hold the load in place. But a stepper motor can also hold a load in place when there is no current applied to the windings (for example, in a power-off condition). This is commonly known as the detent torque or residual torque.<\/p>\n\n\n\n

Detent torque<\/strong>
Stated another way, detent torque is the amount of torque the motor produces when the windings are not energized. The effect of detent torque can be felt when moving the motor shaft by hand, in the form of torque pulsations or cogging.<\/p>\n\n\n\n

Of the three types of best stepper motors from china<\/a>\u2014variable reluctance, permanent magnet, and hybrid\u2014only variable reluctance motors do not exhibit detent torque. This is due to the difference in construction between variable reluctance motors versus permanent magnet and hybrid designs. Both permanent magnet and hybrid stepper motors use a permanent magnet rotor, which is attracted to the poles of the stator even when there is no power to the stator windings. Variable reluctance motors, on the other hand, use a passive (non-magnetized) rotor made of soft iron; therefore, there is no attraction between the rotor and the stator when the stator windings are not energized. Hybrid stepper motors incorporate teeth on the surface of the rotor, so they are able to better manage the magnetic flux between the stator and rotor, which gives them higher holding, dynamic, and detent torque values than permanent magnet steppers.<\/p>\n\n\n\n

\"Detent<\/figure>\n\n\n\n

Holding torque<\/strong>
A nema 23 stepper motor<\/a>\u2019s holding torque is the amount of torque needed in order to move the motor one full step when the windings are energized but the rotor is stationary. Holding torque is one of the primary benefits that stepper motors offer versus servo motors and makes steppers a good choice for cases where a load needs to be held in place.<\/p>\n\n\n\n

\"Stepper


Holding torque is typically higher than running torque, and is limited primarily by the maximum current that the motor can withstand. From a practical standpoint, holding torque is the sum of the magnetic force exerted by the coils to hold the motor\u2019s current position, plus the detent torque. Once the motor is moving, the torque available at low speeds equals the holding torque minus two times the detent torque (because the motor has to work against the detent torque).




<\/figcaption><\/figure>\n","protected":false},"excerpt":{"rendered":"

One feature of stepper motors that differentiates them from other motor types\u2014particularly servo motors\u2014is that they exhibit holding torque. This means that when the windings are energized but the rotor is stationary, the motor can hold the load in place. But a stepper motor can also hold a load in place when there is no … Continue reading “What\u2019s the difference between detent torque and holding torque?”<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[],"tags":[],"class_list":["post-125","post","type-post","status-publish","format-standard","hentry"],"_links":{"self":[{"href":"https:\/\/www.stepperchina.com\/index.php\/wp-json\/wp\/v2\/posts\/125","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.stepperchina.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.stepperchina.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.stepperchina.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.stepperchina.com\/index.php\/wp-json\/wp\/v2\/comments?post=125"}],"version-history":[{"count":1,"href":"https:\/\/www.stepperchina.com\/index.php\/wp-json\/wp\/v2\/posts\/125\/revisions"}],"predecessor-version":[{"id":126,"href":"https:\/\/www.stepperchina.com\/index.php\/wp-json\/wp\/v2\/posts\/125\/revisions\/126"}],"wp:attachment":[{"href":"https:\/\/www.stepperchina.com\/index.php\/wp-json\/wp\/v2\/media?parent=125"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.stepperchina.com\/index.php\/wp-json\/wp\/v2\/categories?post=125"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.stepperchina.com\/index.php\/wp-json\/wp\/v2\/tags?post=125"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}